A lightweight hanging windsock attaches to an existing pole or support with the supplied rope and carabiner. The attachment point must be secure, high enough for the windsock to hang freely, and clear of nearby structures.
This guide applies to hanging lightweight windsocks. If your windsock mounts on a stainless-steel frame, use the heavy-duty windsock installation guide instead.
Confirm that the pole has a secure eye bolt or similar attachment point near the top. The attachment point should be free of sharp edges that could rub against the rope.
Attach the supplied carabiner to the eye bolt or attachment point. Confirm that the carabiner is fully closed before letting the windsock hang.
Let the windsock and rope hang fully. Check that they remain clear of the ground, fences, buildings, branches, and other nearby obstructions. Move the attachment point higher if the windsock or rope can contact anything below it.
Lightweight windsock size is generally based on pole height and viewing distance. Use the table below as a starting point, then confirm that the installation has enough clearance for the selected windsock and rope.
| Pole height above ground | Suggested lightweight windsock size |
|---|---|
| 6–9 ft | 8 × 24 in |
| 10–15 ft | 10 × 36 in |
| 15 ft or higher | 12 × 48 in |
A lightweight hanging windsock uses a rope and carabiner. Heavy-duty airport and industrial windsocks rotate on a windsock frame and follow a different installation process. A pole by itself does not include a windsock frame.