Our flags are printed on 4 oz, UV resistant coated, knitted polyester. All of our inks and UV rated and resist fading
Proofs are sent to you in 24-48 hours. Flags are produced 5 days after proof approval. Shipping is normally an additional 5 business days within the US, depending on your location.
Our flags are printed on 4 oz, highly durable, knitted polyester. They are fabricated with 4-line high strength stitching and brass grommets
There are no limitations in regards to the number of colors used in your logo.
We turn your low quality artwork into hi-res printable art FREE OF CHARGE with every order. Upload any file you have and let us do the rest!
The Wyoming state flag was adopted in 1817. It consists of the state seal branded on the hide of a white bison facing the hoist on a blue field bordered by a white and red stripe. The seal shows Victory holding a scroll proclaiming "Equal Rights" standing between two columns. A cowboy and a miner with a shield of the U.S. between their feet appear along with some ribbons bearing the names of important products.
Our state flags are made from 100% Lightweight Knitted Polyester, specially made for flags, is UV resistant and does well in all weather conditions.
See Our Sizing Chart for more info on the right size flag for your flag pole
At the Custom Windsocks Company we understand that artwork can be a bit of a headache when ordering. Our aim is to take the pain out of ordering such that you can be confident in the product you're getting.
For all custom products we provide free proofs. You can rest assured that we won't simply go to production and produce something that you were not expecting. TO speed up the proofing process, add your notes in the "notes" section when ordering. Tell us what would like to see ie: "change my logo to red and add the text "ABC" under it". Important note: This applies only to custom products, not "personalized" products where you choose our design template and add your name/text.
We will vectorize your logo for free (and then give you the file!). What does this mean? It means that we will turn your lo-resolution art into "vector art" which will not pixelate when enlarged for FREE. Oftentimes this is a barrier for many people as they cannot locate their vector file from when their logo was created or they simply just don't have it. No worries, we'll do it for you AND we'll send it to you for future use with us or anyone else you may want to get things printed with for FREE (T-shirts, business cards, promo products...they all need a vector file). We'll even pull your logo off a business card, sign, T-shirt or anything you can get a decent photo of!
We can manipulate your logo so that it will show up well on your custom windsock or custom flag. This means we can take your stacked logo and turn into a landscape version so it fits well on your product or we may flip your color scheme around such that it shows up well on the windsock or flag. Of course, you can request this or we may take the liberty of doing it and then showing you a couple of options to see if you like it.
Deciding on the size of flag you want is really about the desired appearance you want your flag pole to have when it's flying your flag. The sizes below are suggested for standard flagpole lengths
Generally speaking, the flag length should be between 1/3 and 1/4 of the flagpole height. Of course, this is a matter of taste, but many flags flown at government and public institutions follow this rule of thumb.
|
Application |
Size of Pole |
Standard Flag Sizes |
|
Outdoor Flag Pole |
20’ |
36" x 60", 48" x 72" |
|
|
25’ |
60" x 96" |
|
|
30’ |
72" x 120" |
|
|
40’ |
96" x 144" |
|
|
50’ |
10' x 15' |
|
|
60' |
12' x 18' |
|
|
70' |
15' x 25' |
|
|
105' |
20' x 30' |
|
|
125' |
20' x 38' |
|
|
155' |
30' x 50' |
|
|
200' |
30' x 60' |
|
Indoor Flag Display |
8' | 36"x60" |
|
Angle Wall Mounted |
8' | 36"x60" |
|
Rodeo Flag |
8' | 36"x60" (most common), 48"x72" |
You should always check your flag size against the recommended flag size and load that your flagpole manufacturer recommends. Often times if a flagpole is flying too large a flag, it will become overloaded and break.
Our custom flags are designed to be compatible with any flagpole. The custom flags are finished standard with grommets, but on request we are able to finish the flags with thimbles, rope and toggle, sleeves, fringe and all other kinds of special flag finishings to make your installation easier.
There are a few ways you can install your flag onto a pole, most of which depends on how you're going to use it. If you're using it for a rodeo or parade, the materials and tools you need will be different than if you're installing it on a commercial flagpole. At the Custom Windsock Co, we finish our flags either with grommets or a 2" sleeve that is closed on top.
Sleeved flags are generally used for parades and rodeos because
If you plan to use your flag outdoors for long periods of time, it is best to have your flag finished with grommets as it offers a stronger connection onto your pole.
Note on all Non USA orders: All duties and taxes that may be incurred upon import are the customer's responsibility.
Note: Any of the above shipping timings and costs can be changed at any time at the sole discretion of the Custom Windsock Co.
At the Custom Windsock Company, we want you to be satisfied when you receive your products. All custom products are tailor made to your specifications but because all the finishing and sewing is either done by hand or by a person with a sewing machine, sometimes there is potential for human error, however minimal. Under normal circumstances, our quality control department would pick up on it but sometimes things slip through and the order is dispatched. You might be wondering, what do I do incase of a manufacturing defect?
If our products are faulty in any way, you can return them within 14 days of receipt. You can contact our customer service department by calling 1-833-786-1035 or emailing info@custom-windsocks.com. Let us know your name, order number and concern and we will respond quickly to resolve your issues. We ask you provide a digital image of the fault in your product as well as a clear description of the problem.
In most cases, we will be able to resolve your issue via email. If the fault cannot be verified, you may need to return your product to us for inspection.
With regards to ALL stock products and ALL hardware
All returns must be approved prior to attempting a return. Please email us at info@custom-windsocks.com and state the reason for return to obtain approval for a return. If a return is received that did not obtain prior approval will not be refunded.
In regards to all custom printed products
Our friendly and knowledgable support team is here to answer any of questions.
☎️ -
1-833-786-1035, between 9AM and 5PM Eastern Standard Time
📧 -
info@custom-windsocks.com
Feel free to contact us for a quote on bulk orders by completing the fields and including as much information as possible for us to quote you appropriately. Let us know the address and country to which you want your windsocks shipped as well as an approximate time frame during which you wish to have the windsocks in hand.
